Sunday, June 28, 2009

how to boot-up your MP3/MP4



eto ang nasubukan ko na and it works.. ng ma dead ang player ng costumer ko


to put your dead MP3/MP4 player to bootmode (aka. DFU mode) follow the following steps...

1. remove the batteries of the player...
2. locate the memory IC (its usually labeled SAMSUNG)...
3. short the pins indicated at the pekture below (you can use precision screwdriver for this)...
4. continue shorting it and connect usb cable...

your PC should detect ADFU device and now you are ready to flash it again...



thanks to THRASED



try ko update ang firmware ng mp4 ko kaya lang wrong firmware na ipasok kaya deads???

dito kaya sa memory ic na to asan kaya ang boot mode?
asan kaya ang TP nito para magboot mode?nandyan na din ang documents sa ic na yan..kaya lang bopols ako sa pag unawa dyan...
Name:  DSC00255.JPG Views: 4628 Size:  74.8 KB

HY27UG(08_16)4G(2_D)M_Series(Rev.0.7).rar
try ko na din ang solution dito kaso wala pa rin...ayaw tanggapin ang adfuupdate.inf
http://www.mympxplayer.org/dead-play...ide-vt567.html


nadedetect sya as usb kaya lang ayaw mapasukan ng driver...



Name:  usb.JPG Views: 4597 Size:  64.3 KB

Name:  usb2.JPG Views: 4476 Size:  69.6 KB

Name:  usb 3.JPG Views: 4580 Size:  41.7 KB

ano kaya problema nito???

Mp4 mp5 repair guide here......



ITO na ung hini hintay niyo mga i dol alam ko ang tread na ito..is na tread na ito dati kaya lang dami nag ask sa atin wer na daw by the ito na uli........





link---------->http://uploading.com/files/PDO603MH/mp4.exe.html

galing poh yan sa mga kasama natin...

galing sa atin lahat.....gave thanks for gsmsandwich salamat sa samahan walang ka pantay
__________________
Sniper---->YM SI Supersandwich






UMA APAW ANG SARAP ANG AKIN TINAPAY YAHOO.......

Saturday, June 27, 2009

Flashing tool for atj2137n with drivers



Eto na ang pinakahihintay ng marami .........

Flashing Tool for ATJ2137N ..... download na !

Here's the link:

FLASHING TOOL FOR ATJ2137N CHIPSET - With Drivers

Note: Courtesy of Reymisteryo
__________________
Don't problem the problem
Bcoz problem will give you a problem .

Sunday, May 31, 2009

SPMP3052B Deadset Done tayo ang una.....



opo sa maniwala kayo o hindi tayo ang una.....

history: Deadset

Chipset:SPMP3052B

Board ID:285_V5

a lot of tricks bago natapos....

First move...

Back up by using my tricks with FRM new Version 1.2.0.8


http://www.gsmsandwich.com.ph/forum/...d.php?t=250203

FRM 1.2.0.8

http://www.gsmsandwich.com.ph/forum/...9&postcount=10

Success back up completed.....(bwenas talaga)

Then restore na lang...plus some tricks.....

Then Flashing by FRM 1.2.0.8

Finish Product....





at syempre ang back up di mawawala yan.....

download na....

SPMP3052B---285_V5

loading mp5 done..with different firmware.



i recieved one mp5 loading problem..i tried to flash with same model firmware but no luck..the result is white screen..i flash again with different version..the result is black screen..until i try different firmware..and after flashing..problem solved..all are working..camera..and others...


board id number: aj250_v14 080917


camera id number: xhb 7676fn


i flashed it with aj282 firmware...and loading is gone..the mp5 is working again...



Saturday, May 23, 2009

Bootmode in shell



Magandang araw sa mga bosing...

May nagawa akong bootmode i one shell baka makatulong.




FRM Pro, USB Driver, (Loading Solustion) For MP5/MP4 Heres The Link



Sa mga di naka Download....

Eto na po FRM Pro setup_v1.1.9b.exe

After Bootmode (Install) Driver.rar

Download now.......


Thanks!
reymisteryo

At U'r Service Team!